9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-1903001.png)
Fluid - A/T: Service and Repair
Changing the Transmission Fluid
Changing the transmission fluid
1. Place the car on a lift. Engage P and apply the handbrake. Chock the wheels if a track lift is being used.
Convertible: Remove chassis reinforcement, front subframe, CV.
2. Place a receptacle under the car and drain the transmission fluid through the bottom plug. Refit the plug with a new seal. Use protective gloves.
Tightening torque 45 Nm (33 ft. lbs.)
Warning: The oil may be very hot if the car has just been driven.
3. Detach the oil cooler hose connections from the transmission.
4. Remove the seals from the transmission. Use 83 90 270 Sliding hammer and 87 92 319 Adapter, 3/8" - M10 and 87 92 756 Oil pipe puller.
