9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2006001.png)
Clutch Slave Cylinder: Service and Repair
Slave cylinder
To remove
1. Remove the gearbox, see Gearbox assembly FM35 and Gearbox assembly FM68
2. Detach the delivery pipe.
3. Remove the three retaining bolts for the slave cylinder and pull it out.
To fit
1. Apply 74 96 268 Thread locking adhesive to the retaining bolts, see List of lubricants and sealants.
2. Bolt on the slave cylinder.
