9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2029001.png)
Shift Cable: Adjustments
MT6
Adjusting gear cables
Adjustment
1. Engage neutral gear.
2. Lift in the selector shaft slightly and insert 87 92 335 Lock pin into the hole in the shaft.
3. Detach the gear lever cover and rubber mat and lift up the cover. Use 82 93 474 Removal tool.
4. Carefully press a screwdriver blade onto the cable adjuster and pry slightly towards the gear lever. A click is heard which means that the
adjustment catch has released. Repeat the procedure on the other cable adjuster.
