9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2029002.png)
5. Lock the gear lever in adjustment position by lifting the adjusting sleeve and pushing the two catches in at the same time. Use suitable pliers.
Carefully release the adjusting sleeve downward and allow the catch to enter the recess in the gear lever housing (adjustment position).
6. Hold in the gear lever and move it to the left. Hold it in this position and at the same time press the screwdriver against the crescent shaped section
of the adjustment catch. When a click is heard the catch has engaged the correct position. Repeat for the other cable adjuster.
7. Lift up the adjusting sleeve to its normal position and make sure the catches lock
8. Remove the lock pin.
9. Check the shifting positions.
10. Fit the gear lever cover and rubber mat.
