9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
5. Remove the centre console left-hand front side panel (shown on image as item # 6).
6. Remove the gaiter for the air duct (shown on image as item # 7).
7. Undo the plastic cover for the gear lever and the rubber mat in the storage compartment and fold up (shown on image as items # 8).
Use 82 93 474 Removal tool
8. Detach the cable adjusters in the gear lever housing with a screwdriver (shown on image as item # 9).
Important: Ensure that the wire adjustment is not damaged.
9. Press the catches and detach the cable sheaths from the gear lever housing. Lift the air duct slightly with a large screwdriver when the detaching
the cable sheaths (shown on image as item # 10).