9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2031001.png)
Shift Cable: Service and Repair
MT6
This article has been updated by Technical Service Bulletin (TSB) 471-2421 dated November 2003.
Gear Cable
To Remove
1. Engage a suitable gear position: 5-speed: position 4. F17 and 6-speed: neutral
2. Lift the cable connections from the selector arms on the gearbox.
3. Detach the cables from the cable retainers on the gearbox by pulling back the locking sleeves.
4. Undo the rubber seal in the bulkhead wall and then the plastic grommet.
