9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2099001.png)
Transmission Mode Switch: Description and Operation
Gear Selector Control Module (726)
Main use
To convey information to TCM if shifting up or down is done in gear position "M".
To inform Ignition switch module that gear position "P" has been selected.
To indicate with LEDs in the gear selector coulisse the gear position that is currently selected, P-RN- D or M.
Type
Microprocessor with integrated Hall sensor.
Activation
The SLM control module is powered with +30 on pin 2 from main fuse box 22, fuse 5. Grounding takes place on pin 3, grounding point G41. Bus
communication (I-bus) takes place on pin 12. Communication regarding up or down shifting in position "M" takes place from pin 7 on SLM to pin 8 (A)
on TCM.
