9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
Windshield Moulding / Trim: Service and Repair
The A Pillar Trim Moulding, CV
To remove
1. Retract the soft top.
2. Pull out the windscreen frame seal from the A pillar trim moulding. Start at the bottom edge.
3. Undo the screws from the A pillar seal mount. Remove the mount.
4. Pull out the trim moulding from the corner of the rubber moulding and pull away the thin rubber moulding.