9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
9. Unplug the connector.
10. Remove the wiper assembly.
To fit
1. Fit the wiper assembly.
2. Plug in the connector.
3. Fit the connector to the clip.
4. Turn the ignition ON to zero the position of the wiper assembly.
5. Check that the movement of the wiper assembly is correct.
6. RHD: Secure with a cable tie.
7. Start by fitting the cover on the left-hand side. Guide in the corner against the windscreen moulding and left-hand windscreen wiper spindle.