9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2900003.png)
7. Remove nuts and studs holding the bottom of the window.
8. Unplug the electric connections for rear window heating and turn up the contact plates against the window.
9. When changing glued windows, use 82 93 714 Window removal tool kit. If the window is so damaged that the suction cups will not fasten, use 30
14 099 Cutting wire handles to cut out the window with the help of an assistant.
WARNING: Use the protective equipment that is supplied with the windscreen removal and adhesive kit, such as the goggles and
protective gloves.
10. Measure up 6.5 m cutting wire.
11. Insert the screwdriver through the adhesive from inside. There are marks on the outside moulding to show where it is best to insert the screwdriver
(a small notch in the moulding). Take care not to damage the rubber moulding if the window is to be refitted.
