9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2900007.png)
18. Wind with a ratchet handle so that the wire cuts through the adhesive. If necessary, use the protective tool with suction cup between the cutting
wire and the metal so that the wire does not cut into the metal. Gradually move the reel to obtain a good angle. An acute angle will cut better. If
necessary, use the second reel for support. If you think the wire might break, cease cutting for about 10-15 seconds to allow the wire to work into
the adhesive.
