9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-3021002.png)
1.h. Carefully fold down the soft top.
WARNING: There is a pinch hazard and danger of crushing if you let go of the soft top in the half-open position (when vertical). It
will fall backwards or forwards, depending on its centre of gravity.
1.i. Close the soft top cover.
2. Release the rear seat backrest and fold it forward.
3. Remove the cover from the hydraulic unit.
4. Fold aside the luggage compartment mat and unscrew the hydraulic unit mounting bolts.
5. Lift up the hydraulic unit and unplug the connectors. Loosen the holders for the hydraulic hoses to make it easier to lift the unit.
6. Open the emergency valve. Unscrew the reservoir oil plug and then retighten it to even out the pressure.
NOTE: This prevents unnecessary oil spill when hydraulic unit components are replaced.
7. Place rags under the hydraulic unit it turn it so that the oil reservoir points down and the electric motor points up.
IMPORTANT: It is very important that the unit remains in this position throughout the replacement operation.
