9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
1. Fit the fifth bow on the right side and fit the screws loosely.
2. Insert the leads for the electrically heated rear window in the groove.
IMPORTANT: Make sure that the cables are not pinched between the mounting and the fifth bow.
3. Fasten the screws using the markings on the left side.
4. Tighten the screws according to the markings on the right side.
5. Fit the window guide and cable for the fourth bow.
6. Fit the lock fittings. Adjust the lock fittings.
7. Fit the soft top.
First Bow
First Bow
Removing