9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-3118025.png)
NOTE: The work can be carried out with the soft top raised (closed).
If it is not possible to operate the soft top via the electric controls proceed as follows:
1.a. Release the rear seat backrest and fold it forward.
1.b. Remove the cover over the emergency valve and open the valve approx. one half turn (A).
1.c. Unlock the soft top from the windscreen frame.
1.d. Activate the fifth bow lock using the diagnostic tool set to UNLOCK and fold up the fifth bow.
1.e. Push the wheel bolt tool through the hole in the covering on the right-hand side of the luggage compartment and into the link arm of the
operating mechanism (B).
1.f. Unlock the soft top cover by pulling the tool backwards until the soft top cover lifts up a few centimetres (C).
1.g. Remove the tool, close the boot lid and open the soft top cover.
1.h. Carefully fold down the soft top.
WARNING: There is a pinch hazard and danger of crushing if you let go of the soft top in the half-open position (when vertical). It
will fall backwards or forwards, depending on its centre of gravity.
1.i. Close the soft top cover.
2. Release the rear seat backrest and fold it forward.
3. Remove the cover from the hydraulic unit.
