9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2076002.png)
2.
Remove the pipe from the T-nipple on the vacuum pump.
3.
Aut: Remove the gear cable clip from the pipe.
4.
Remove the pipe from the brake servo. Any heat shield on the check valve shall not be refitted.
To fit
1.
Fit the pipe to the brake servo.
2.
Fit the pipe to the T-nipple on the vacuum pump.
