9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-983003.png)
1. Connect the anti-freeze sensor body to the low-pressure pipe with the clip. Turn the clip so that it does not rest on the evaporator casing cover.
2. Plug in the connector.
3. Fit a new seal between the evaporator casing cover and the climate control unit. Refit the evaporator casing cover on the climate control unit and
tighten the bolts. Check to make sure that no condensation leaks out from the evaporator.
4. Refit the fan control and tighten the retaining bolts (cars with ACC).
5. Check that the compressor cycles as follows:
5.a.ACC:
Set the temperature to 25˚C and low fan speed.
5.b.Control panel:
Set the temperature control on medium heat with the A/C button pressed in and fan in position 1.
6. Refit the protective cover.
