9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-813004.png)
6. Remove the protective sleeves and fit the valve tappets.
7. Fit the camshafts and bearing caps, start where cams are pointing down and acting on the tappets. The bearing caps are marked 1-5 for the intake
side and 6-10 for the exhaust side.
Tightening torque: 15 Nm (11 ft. lbs.)
Important: The black bolts have an oilway and should be fitted on the spark plug side.
8. Line up the marks on the camshafts with their timing marks.
