9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-855037.png)
Figure 31
3.
The compression rings must be turned with the marking "TOP" upward.
4.
Oil the piston and ring before fitting. Turn the compression rings so that the rings' openings are displaced 180° from each other and fit them
directly in front of the gudgeon pin ends.
5.
Oil in the piston rings, bearings and cylinder.
6.
Fit the pistons using Piston fitting tool 83 95 113. The pistons must be fitted with the arrow pointing toward the timing chain.
