9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
Timing Cover: Service and Repair
Timing cover
To remove
Method excluded for power train removed and mounted in fixture.
1
Remove the dipstick.
2
Remove the idler pulley.
3
Remove the power steering pump and its bracket with the lifting eye.
4
Remove the water pump and the sleeve with O-rings.
5
Remove the protective plate and oil sump. Leave the guide sleeve in the cylinder block. Wipe up any oil that has dripped .
6
Use flywheel locking segment 83 94 86. Remove the crankshaft pulley.
7
Disconnect the crankcase breather hose from the oil sump.
8
Remove the locating pins in the timing cover by cutting an internal thread in them using a 3/8" UNC thread tap and withdraw them with sliding