9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2411003.png)
1. Fit the control wire at the rear of the control panel. The wire should be positioned above the control shaft.
2. Press on the clip that secures the wire in the control panel.
3. Plug in the connectors.
4. Fit the control panel and fit the control shaft.
IMPORTANT: Make sure that the control shaft is correctly inserted into the heating unit before fitting it to the control panel.
5. Refit the side panels on the centre console.
6. Refit the glove box.
Control Shaft
Control Shaft
