9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
3. LHD: Raise the car.
4. Lubricate a new O-ring with synthetic vaseline and fit the O-ring on the high- pressure pipe.
5. Tighten the high-pressure pipe to the PAD-connection.
Tightening torque 9 Nm (7 lbf ft)
6. LHD: Lower the car.
7. Remove the bolt that secures the power steering fluid reservoir.
8. Remove the bolt that secures the pipe between the power steering fluid reservoir and the servo pump.
9. Remove the power steering fluid reservoir pipe from the holder underneath the battery shelf.