9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-3408043.png)
The arrival time is calculated from information on:
-
Current time (internal SID function)
-
Programmed value in DIST.
-
Speed, unit km/h, mph (bus information from MIU).
The display range is from the present time and onwards up to 23 hours and 59 minutes, updated every second.
When DIST is 0, the current time will be displayed on the SID.
Resetting with CLR does not affect the programmed/calculated value for arrival time.
Calculations
The SID unit calculates the ratio between DIST, ARRIV and SPD. To carry out these calculations, the value in DIST must be greater than 0.
If an arrival time is then programmed into ARRIV the SID unit will show the calculated average speed, or if a desired average speed is programmed in
SPD, the SID unit will show the estimated arrival time in ARRIV.
If the calculation is made when the car is running, the calculated value is replaced by the correct figure after 10 seconds. If the calculation is made with
the car stationary, the calculated value is replaced by the correct figure as soon as the car is driven.
ALARM (time alarm)
