saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Bleeding the Hydraulic System|Page 2639 > < Bleeding the Hydraulic System|Page 2637
Page 3
background image

5. Connect the hose and make sure it is tightened securely.
6. Operate the soft top for one complete cycle to its lowered (open) position and then up (closed) again.
7. Check the hose to make sure there are no oil leaks.
8. Wait for one minute so that oil and air has time to separate in the reservoir.
9. Operate the soft top through an additional full cycle.

10. Allow the car to stand for at least 2 hours.

IMPORTANT:  The car may be moved (driven); soft top operation is strictly forbidden.

11. Operate the soft top through 2 complete cycles; listen for noise and look for halting movements in the soft top caused by air in the system.

Is the soft-top functioning correctly?

JA
The car is OK.

NO
Continue to step 12.

12. Manoeuvre the soft top so that the fifth bow is open and the soft top cover is closed but not locked.
13. Open the boot lid and remove the scuff plate cover.

Bleeding the Hydraulic System|Page 2639 > < Bleeding the Hydraulic System|Page 2637