9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2271003.png)
21. Place the harness in the cable channel at the RH support and secure it with tape.
22. Cars without passenger airbag: Isolate the excess cable for the passenger airbag. Fix the cable in place with a cable tie and tape.
Cars with passenger airbag: Unplug the connector from the passenger airbag. Isolate and secure it with tape so that it does not move. Plug in the
spare parts harness connector.
WARNING: If the passenger airbag has been disconnected, check that the customer has a valid contract for the disconnected airbag and that a
warning label with the text "Passenger airbag disconnected" is clearly visible on the dashboard.
23. Place the harness along the instrument harness above the main instrument unit and then down the exterior.
24. Prise out the blue wire in pin 5 of the main instrument unit connector
25. Prise in the spare parts harness' blue wire in pin 5 of the main instrument unit connector
