9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
Procedure:
Replace CIM.
Note:
New improved CIM introduced as of VIN 41032379 (4D) and 46009782 (CV).
11.
Warning message "Immobilizer fault"
Cars affected:
Saab 9-3 (9440)
Background:
The warning message "Immobilizer fault Attempt restart. Contact workshop" is displayed despite no DTCs and no starting problems.
Procedure:
Carry out "Add" ICM with Tech2 version 117.000 or later.
Any warranty cost should be charged against MIU, not ICM.
Note:
New ICM EOL introduced as of VIN 51050577 (4D) and 56015055 (CV).
MIU - Fault Symptom
MIU - fault symptom
1.
MIU - Fuel gauge does not indicate full tank
Cars affected:
Saab 9-3 (9440) 4D up to 51012606 with 58-litre tank
Saab 9-3 (9440) CV up to 56004405 with 58-litre tank
Background:
Due to faulty parameters in MIU, the tank gauge does not indicate a full tank, even though it is full.
Procedure:
Carry out "Add" ICM with Tech2 version 113.000 or later.
Note:
New parameters in MIU introduced as of VIN 51012607 (4D) and 56004406 (CV).
2.
MIU - Display goes black periodically when the light switch is turned off
Cars affected:
Saab 9-3 (9440) M03-M04 with ICM1 or ICM2
Background:
Due to faulty parameters in ICM, the information display in MIU can go black periodically.
Procedure:
Carry out Add ICM with Tech2 version 117.000 or later.
Note:
New improved light parameters introduced as of M05.
SID, ICM, CU and DVD - Fault Symptom
SID, ICM, CU and DVD - fault symptom