9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-1086002.png)
1. Apply Krytox (part no. 30 19 312) to the rubber seals and fit the ignition discharge module.
2. Fit the 4 screws.
Tightening torque 11 Nm (8.1 lbf ft)
3. Spray the 10-pin ignition discharge module connector with Kontakt 61 (part no. 30 04 520). Plug in the connector.
