9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2584002.png)
1. Put in place the new fastening eyes.
2. Seam weld on the fastening eyes as illustrated, dimensions are in mm.
3. Clean all welds.
4. Apply a coat of primer to all the bare metal surfaces. Use Standox 1K Fullprimer. Apply a thin coat of anti-corrosion agent and allow it to
penetrate under the attachments after painting.
