9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2531003.png)
-
Contact roller (2).
-
Control module (3).
-
All seat belts and belt tensioners in the front seats (4). See Front seat belts with belt tensioners triggered, 5D or Front seat belts with belt tensioners
triggered, 3D.
-
All seat belts in the rear seat that were used during the collision (5).
-
Passenger airbag (where applicable) and dashboard (6).
-
Side airbags, with respective sensor and backrest upholstery, that were detonated during the collision (7).
The following components must be inspected for burn damage and deformation:
-
Knee shield
-
SRS wiring harness
-
Windscreen
Change damaged components. See Knee shield, driver, Knee shield, passenger, and Windscreen.
WARNING: Change all the seat belts if it cannot be determined with certainty which belts were in use when the collision occurred. The seat
belt on the passenger side must always be changed, even if it has not been used. This is because the seat-belt tensioner has been triggered.
