saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Steering Wheel|Service and Repair|Page 9046 > < Steering - Snapping Noise When Turning Steering Wheel|Page 9042
Page 1
background image

Steering Wheel: Service and Repair

Steering Wheel 

To remove 

Warning:  Read the safety and handling instructions for the Airbag (SRS) before starting work. Refer to Restraint Systems, Air Bag Systems

Important:  Ensure the wheels are pointing straight ahead before dismantling begins.

1. Turn the ignition to OFF.

2. Remove the airbag from the steering wheel, 2 plugs and screws.
3. Lift out the airbag and unplug the connector.

Important:  The steering wheel often comes loose suddenly from the cone and there is a risk that the contact roller and leads can fasten to the
steering wheel and be damaged.

4. Undo the steering wheel nut but leave it on the last few threads. Pull the steering wheel to this point.

Warning:  Never use the steering column adjustment to knock loose the steering wheel, as this will damage the impact joint. 

5. Remove the nut and carefully lift off the steering wheel.

To fit 
1. Make sure the wheels are pointing straight ahead.
2. Put the steering wheel in place.

Steering Wheel|Service and Repair|Page 9046 > < Steering - Snapping Noise When Turning Steering Wheel|Page 9042