9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-2322002.png)
2. Place the back plate on the wheel hub and spacer.
3. Fit the back plate and spacer. Fit new wheel-hub nuts.
Tightening torque: 50 Nm + 30° (37 ft. lbs. + 30°)
4. Mount the brake disc on the hub and fit the locking screw, securing it with Loctite or other thread-locking compound.
5. Attach the handbrake cable to the lever.
6. Fit the return spring on the lever and plug in the speed sensor connector.
7. Position the brake caliper and fit the retaining bolts, securing them with Loctite or other thread-locking compound.
8. Screw in the adjusting nut for the brake shoes through the hole in the disc until the disc is prevented from rotating.
9. Back off the adjusting nut until the brake disc is just free to rotate.
10. Fit the wheel. Lower the car.
Tightening torque: 110 Nm (81 ft. lbs.)
