9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
Constant Velocity Joint: Service and Repair
Outer Driveshaft Universal Joint
Outer Drive-Shaft Universal Joint
Cleaning when changing rubber gaiter
1. Make sure the shaft and gaiter are clean. Fasten the drive shaft in a vice.
2. Loosen the clamps on the outer universal joint and press the rubber gaiter a way up the shaft. Clean the joint from grease.
3. Expand the circlip and tap off the universal joint from the shaft with a hammer and a brass drift.