9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-1838002.png)
1. Fit the new rubber gaiter to the drive shaft and fit a new clamp.
2. Fit the tripod. Make sure that its bevelled edge is fitted inwards on the shaft.
3. Fit the circlip.
4. Fill the universal joint with new grease (16) 87 92 624 (Shell Grease SL 0233).
5. Couple the drive shaft and tripods housing.
B235R: Bend back the plastic protector while making sure no protruding sharp edges can damage the rubber boot.
6. Thread on the rubber gaiter and fit a new clamp.
7. Fit the drive shafts.
