9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-1854002.png)
3. Lift up the gaiter at the gear lever and check that 87 92 632 Locking pin can be inserted in the hole of the gear lever housing.
If the locking pin cannot be inserted, the gear position needs adjusting as described in step 4 to 10 below. Remove the locking pin if no adjustment
is required.
4. From above, undo the clamp securing the selector rod to the linkage on the gearbox.
5. Check that the gear lever is set to 4th gear position.
