9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-3784005.png)
20. Remove the three screws holding the inner roof to the fifth bow. Remove the inner roof rod.
21. Remove the cable holder and connector for the rear screen heating, and take out the window control with the window. Remove the spring.
22. Mark the fifth bow middle position on the seal. Remove the seal from the fifth bow and remove the screws securing the fifth bow seal.
IMPORTANT: Pull away the seal carefully so that it is not damaged.
23. Cars up to VIN X7020925: Drill out the pop rivets in the fifth bow corner (4 pcs) and remove rivet residue from the holes. Remove the outer roof
from the fifth bow and rear rail.
24. Remove the rear window mounting from the lock lugs and lift away the soft top outer cover and the headlining along with the rear window.
Dismantling soft top cover, headlining and rear window
1. Position the soft top fabric with the rear window on a work bench.
2. Manufacture a tool as shown in the illustration.
