9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-3797010.png)
IMPORTANT: The adhesive starts to cure as soon as the contents of the two tubes is mixed. Fit the window glass within 5 minutes of
starting to apply the bead of adhesive.
10. Have a colleague help to lift the window into place.
10.a. Adjust the window up towards the roof. Check that there is the same distance towards the A-pillars on the right and left side. Press in the
window towards the spacers.
10.b. Secure the windscreen in this position and turn up the eccentric stops so that they are positioned against the windscreen.
11. Lift up the top edge of the decor strip somewhat in the middle and pour water. Check to make sure that water does not leak into the cabin.
12. Reset the glue gun.
13. Refit the decor strip on the outside of the A-pillars. Start from the top and guide it in correctly using the upper retainer strip clips.
