9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-3827001.png)
Windshield Washer Hose: Service and Repair
Windscreen Washer Hoses
Removal
1. Detach the washer hose from the cover on top of the false bulkhead panel.
2. Detach the hose from the nozzles in the bonnet and remove the hose and rubber bushing from the bonnet.
3. Remove the rubber seal from the protective cover.
4. Remove the clips from the cover on top of the false bulkhead panel.
5. Lift the cover a little and detach the washer hose from the underside of the cover.
6. Pull the hose out through the partition and disconnect it at the fork behind the battery.
Refitting
