9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
Headliner: Service and Repair
Soft Top Cover, Headlining and Rear Window
Soft Top Cover, Headlining And Rear Window
Removing
1. Operate the soft top to half open position and position the soft top support special tool (16) 82 93 144 so that the soft top does not fall when the
hydraulic pressure is released.
2. Remove the front seals and their retainers.
3. Remove the retainer strip in the first bow front edge (9 screws).
4. Lift up the upholstery by the handle with a small screwdriver and remove the handle by pulling the pins out of the groove.
5. Remove the covers that are fastened to the front rail with two plastic clips. Hold the soft top support so that it does not release when the covers are
folded out.
6. Remove the headlining from the first bow. The headlining is attached to the front rail with a screw on each side and is also hooked on at the front
edge and has elastic bands at the sides.