9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
8. Remove the screws and clip securing the headlining to the rear rail.
9. Pull out the fabric from the rear rail.
10. Remove the screw securing the cable to the rear rail.
11. Drill out the pop rivet securing the base.
12. Bend up the rail for the base and remove the screws securing the third bow.
13. Remove the control linkage stub axles (from the inside) and the hinge for the first bow.
14. Remove the soft top support special tool (16) 82 93 144 and raise (close) the soft top.
15. Remove the screw to the fourth bow. Lift away the fourth bow.