9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
/l4-2.0l_turbo_(b205)/Page-3006025.png)
9. Fit the plastic cover on the first bow.
10. Fit the handle and the upholstery by the handle.
11. Refit the retainer strip on the first bow.
IMPORTANT: Take care so that the magnets for the lock are not damaged.
12. Fit the front seal retainers.
13. Lubricate the seals with soapy water. Position the outer edge in the groove and press in the seal. Start from the back and work towards the front.
Fit the front screw.
14. Connect the diagnostics tool and erase any diagnostic trouble code.
15. Check so that there is no water leakage by spraying water from above at an angle.
Never use high pressure.
Fourth Bow
Fourth Bow
Removing
1. Manoeuvre the soft top until the soft top cover and fifth bow are raised.
2. Remove the screws and clip for the headlining.
