saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 10570 > < Procedures|Page 10568
Page 34
background image

NOTE:  This task can be performed with the hood closed.

If the soft top cannot be operated, proceed as follows:
1.a. Release the rear seat backrest and fold it forward.
1.b. Remove the cover on the emergency opening valve and open the valve about one half turn (A).
1.c. Unlatch the soft top from the windscreen frame.
1.d. Activate the fifth bow latch to UNLATCH using the diagnostic tool and raise the fifth bow.
1.e. Insert the wheel bolt tool through the opening in the right-hand luggage compartment trim and attach it in the drive mechanism link arm (B).
1.f. Unlatch the soft top cover by pulling back on the tool until the soft top cover is lifted a few centimetres (C).
1.g. Remove the tool, close the boot lid and open the soft top cover.
1.h. Open the hood carefully.

WARNING:  There is a pinch hazard and danger of crushing if you let go of the soft top in the half-open position (when vertical). It
will fall backwards or forwards, depending on its centre of gravity.

1.i. Close the soft top cover.

2. Release the rear seat backrest and fold it forward.
3. Remove the cover on the hydraulic unit.

Procedures|Page 10570 > < Procedures|Page 10568