9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
1. Fit the latch motor and tighten the bolts. Respective collision cable end sleeves pointing at each other. Fit new cable ties.
Tightening torque, two upper bolts: 14 Nm (10.3 lbf ft)
Two lower bolts: 7 Nm (5.2 lbf ft)
2. Fit the operating arms to the motor.
3. Plug in the connector.
4. Run the soft top up and down a few times and check the function.
5. Refit the shell.