9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
Seat Cover: Service and Repair
Upholstery, Backrest
To remove
1
Remove the front seat from the car. See: Service and Repair/Removal and Replacement/Front Seat/Front Seat
Remove the seat side panels.
2
Cut off the cable tie securing the plastic cover and remove the cover on the inner side of the seat, 1 screw.
3
Undo the straps holding the backrest upholstery at the bottom.
Unplug the connector under the seat.
Cut the relevant binding tie.
4
Release the bottom edge of the upholstery strips and feed the cables out through the hole.
5
Pull out the cardboard from the backrest upholstery.
6
Undo the rear of the backrest upholstery by releasing the upholstery strips along the sides and folding back.