9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
The end position switch consists of a cylinder housing (ground), a contact plate that is fitted in the cylinder housing end, and a spring which is fitted on
the piston. The control module outputs B+ via a 1 kOhm resistor on pin 3 (switch bottom position) and pin 31 (switch upper position), and when the
piston reaches an end position, the spring on the piston will touch the contact plate and cylinder housing, resulting in grounding of the control module
input in question.
Switch In Windscreen Frame Latch