9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
1. Fit the new brake pads in the brake caliper.
^
The outboard brake pads have an acoustic wear warning device that must be face down.
^
The inboard brake pads must be fitted with the arrows pointing in the direction of rotation of the brake disc when the car is driven in a forward
direction.
Fit the brake caliper, clean the guide pins and tighten them using a torque wrench.
Tightening torque: 28 Nm (21 ft. lbs.).
3. Fit the dust caps and the clip.
4. Fit the wheel and tighten the wheel bolts.
Tightening torque 110 Nm (81 ft. lbs.)
5. Lower the car and depress the brake pedal to press out the brake pistons. Adjust the brake fluid level.