9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
/l4-2.0l_turbo_(b205)/Page-3306001.png)
Cruise Control Switch: Testing and Inspection
Checking the ON/OFF Function
Information
Information
Fault diagnosis is performed partly with the control module in diagnosis mode. To exit diagnosis mode, increase the speed to above 32 km/h(20 mph) or
turn off the ignition. All the tests in diagnosis mode must be carried out in a determined order. If they are carried out incorrectly; the diagnosis will return
to 'Check SET function' and have to be restarted from there.
-
Is the car equipped with a manual gearbox or automatic transmission?
See: Manual Gearbox
See: Automatic Transmission
Initiating Diagnostics
Initiating Diagnostics
-
Switch off the engine.
