9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
/l4-2.0l_turbo_(b205)/Page-3315056.png)
-
Rectify the lead between pin 3 in the female connector and fuse 12 in the dashboard main fuse board.
After performing this procedure See: Automatic Transmission/Checking the Fault Symptoms/Lamp Does Not Go on/Final Check
Rectifying the Lead - II
Rectifying the Lead
-
Rectify the lead between female connector pin 4 and control module pin G.
After performing this procedure See: Automatic Transmission/Checking the Fault Symptoms/Lamp Does Not Go on/Final Check
Rectifying the Lead - III
Rectifying the Lead
