saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Checking the Control Module Grounding|Page 12567 > < Checking the Control Module Grounding|Page 12565
Page 67
background image

-

Drive forward slowly.

-

CRUISE lamp should flash at rate corresponding with speed.

Is the function correct?

NO

-

Continue With Checking the Wheel Speed Signal

YES -

See: Automatic Transmission/Final Check 

-

Switch off the engine.

-

Turn the ignition switch to the ON position.

-

Connect BOB (Break Out Box) between CRUISE control module and CRUISE control module female connector.

Checking the Control Module Grounding|Page 12567 > < Checking the Control Module Grounding|Page 12565