9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
IMPORTANT: The stepping motor is integrated in the cruise control module and the wire to the throttle body is connected directly to the control
module.
-
Switch off the engine.
-
Turn the ignition switch to the ON position.
Is the function correct?
NO
-
See: Manual Gearbox/Diagnostic Procedure
YES -
See: Manual Gearbox/Final Check
Diagnostic Procedure
Diagnostic Procedure
-
Rectify the fault as described in 'Adjustment/replacement'.
After performing this procedure See: Automatic Transmission/Final Check
Checking the Wheel Speed Signal
Checking the Wheel Speed Signal
-
Drive forward slowly.
-
CRUISE lamp should flash at rate corresponding with speed
Is the function correct?
NO
-
Continue with Checking the wheel speed signal.
YES -
See: Automatic Transmission/Final Check