9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
/l4-2.0l_turbo_(b205)/Page-840001.png)
Crankshaft Main Bearing Seal: Service and Repair
Adjustment/Replacement (Front)
Crankshaft seal Replacing (in car)
1. Relieve the pressure on the belt tensioner using a ratchet handle extension and insert a 6 mm drill into the hole.
IMPORTANT: Exercise the utmost care to ensure that the belt tensioner does not break at its end position!
2. Raise the car, remove the front right wheel and remove the cover. Lift off the drive belt from the crankshaft belt pulley.
3. Remove the protective plate and insert the flywheel locking attachment, part no. 83 94 868, against the flywheel gear ring.
4. Remove the crankshaft pulley.
5. Remove the old seal with a screwdriver.
