9-3 Convertible (9400) L4-2.0L Turbo (B205) (2000)
Control Assembly: Procedures
Control Panel
Removing
1
Remove the glove box.
2
Remove the side panel on the right side of the centre console.
3
Press out the control panel from the rear and disconnect it from the control shaft.
4
Remove the connectors.
5
Remove the clip securing the wire to the control panel.
6
Unhook the wire loop.
Fitting
1
Fit the control wire at the rear of the control panel. The wire should be positioned above the control shaft.
2
Press on the clip that secures the wire in the control panel.
3
Plug in the connectors.